Italian Version English Version Deutsch Version Corsi Elettroerosioni - Wire cutting construction of deburring tools for sheet metal cutting and die-cast parts. Machinery and technology for custom mechanical
Corsi Elettroerosioni - Wire cutting construction of deburring tools for sheet metal cutting and die-cast parts. Machinery and technology for custom mechanical About Us Technologies Products Social Commitment Green Energy Where We Are Contacts Corsi Elettroerosioni - Wire cutting construction of deburring tools for sheet metal cutting and die-cast parts. Machinery and technology for custom mechanical
  CUTTING / DEBURRING FOR DIE CASTING    ELECTRICAL DISCHARGE MACHINING    CONTROL MASKS    HYDRAULIC WEDGES
WORKHOLDING EQUIPMENT    PLASTIC MOLDS    CUTTING FOR SHEET STEEL
 
     
 
 
 

The wire EDM machines are used specifically to cut from a solid outline silhouettes with simple or complex, the cut can be righteous and that is
parallel to the Z axis of the machine or oblique with a given number of degrees compared with Z, it is also possible to perform a particular contour in
the upper part of the piece and a different one in the lower part.
With this technique you can build punches, dies, molds for shearing, extrusion dies, forming tools, copper or graphite electrodes for use on the machines EDM etc..


 The advantages of the technique are countless EDM wire and among these, in some cases, the elimination of
the adjustment because the cutting surface which is achieved with one or more coats of finish is acceptable in
most cases.
The molds made ​​with this technique, since it can be realized in a single piece and not in many components as those which are generally constructed with the machinery for export of chip, have overall, a greater mechanical resistance and structural.
The field of applications using EDM from production of mechanical components for blind holes, the deep holes of small diameter tungsten wire as an electrode, the narrow slots, the turbine blades and components from the forms and complex.
It can realize the cavity in step by synchronizing the relative movement of the workpiece, which moves in two directions on the plane, with the motion of descent of the electrode.
Also you can get internal cavities in undercut by rotating electrodes, which lead ends in a tip orbiting.

 

 
 

Copyright 2013 Corsi Elettroerosioni s.n.c.  All rights reserved  |  Policy Privacy  |  P.Iva 00598711208  -  Powered by EventoWeb